Table of Contents
Advertisement
OPTION Menu (continued)
42
Downloaded From projector-manual.com Toshiba Manuals
Multifunctional Settings (continued)
Multifunctional Settings (continued)
Item
Pressing the
SERVICE Menu
Select an item using the
ENTER) button to per form each function. :
FANSPEED
AUTO ADJUST
FANSPEED
AUTO
ADJUST
SERVICE
LENS TYPE
LENS LOCK
GHOST
FILTER
MESSAGE
Select the EXECUTE using the
EXECUTE
RESET
The items of the OPTION menu are collectively returned to the initial setting. Note that
the items "VOLUME", "LAMP TIME", "FILTER TIME" and "SERVICE" are not reset.
Description
(or the ENTER) button calls the SERVICE menu.
/
buttons, and press the
LENS TYPE
LENS LOCK
GHOST
Select the fan speed level using the
The HIGH ups rotation speeds of fans, though. Please use this
function in using a projector at highlands etc.
memo
Note that the projector is noisier when the HIGH is selected.
Select the ENABLE or the DISABLE using the
ENABLE
DISABLE
When the ENABLE is selected, detecting a signal change to a RGB
signal performs the automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the clock phase
(H PHASE) and the horizontal size (H SIZE).
Depending on conditions, such as input image, signal cable to the unit,
environment around the unit, etc., the automatic adjustment may not
work correctly. In such a case, please choose DISABLE to disable the
automatic adjustment, and adjust manually.
Select the lens type currently used using the
AUTO
1
2
3
4
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens
2: for a fixed short throw lens
3: for a short throw lens
4: for a long throw lens
5: for a super long throw lens
memo
This setting has an influence on the keystone distortion etc.
memo
About the optional lens, ask your dealer.
Select the TURN ON or the TURN OFF using the
TURN ON
TURN OFF
Selecting the TURN ON locks the adjustment of the lens shift, the zoom and the focus.
1. Choose a color element of ghost using the bottons
2. Adjust the chosen element using buttons
Use the
/
button to set the timer for the interval to show the message for cleaning up the air filter.
100h
200h
300h
TURN OFF
After selecting "50h", "100h", "200h" or "300h", the message "REMINDER ..." will
appear after the timer reaches the interval time set by this operation. Please
refer to the "FILTER TIME" item
41
When "TURN OFF" is chosen, the air filter cleaning message will not appear. Selecting "TURN
OFF" displays the message to call an attention to disabling the air filter cleaning message.
• Please check and clean the air filter periodically, even if there is no message. If
the air filter becomes blocked by dust or others, the internal temperature will rise,
which could cause malfunction, or reduce the lifetime of the projector.
• It is recommended to choose "100h" in general. Please be careful with the operating environment
of the projector and the condition of air filter, especially when "200h", "300h" or "TURN OFF" is chosen.
button to reset the OPTION menu items. :
CANCEL
SERVICE
FANSPEED
NORMAL
AUTO ADJUST
ENABLE
(or the
LENS TYPE
AUTO
LENS LOCK
TURN OFF
GHOST
FILTER MESSAGE
100
FILTER MESSAGE
: SELECT
/
buttons. : HIGH
NORMAL
/
buttons. :
/
buttons. :
5
/
buttons. :
/
.
/
to disappear ghost.
50h
and the table "Related message"
50
.
Advertisement
Table of Contents
