Using The Menus; How To Use The Menus; The Image Adjustment Menu - Toshiba TLP-X3000 Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons on the control panel (main unit side) and remote control.
p.16

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button Display the Setting display menu.
2. Select a Category
Select a category by using .
There are following 5 categories:
Image adjustment menu p.37
Display setting menu p.39
Default setting 1 menu p.42
Default setting 2 menu p.43
Status display menu p.44
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
use the following pages as a reference.
• To return to previous item, press the RETURN button.
4. End Press the MENU button.
(The menu disappears about 30 seconds after the last operation.)
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
or to open the menu.
These marks
signify that
there are setting
screens. Press
or
display a list of
These marks
setting screens.
signify that there
are options.
Press or
to display a list of
options.
* When no item is
changed, press
Toggle items with .
Select items with and press .
Fix selection with .
36

■ The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with "Yes", and those that cannot are marked with "No". (When an item is masked,
it indicates that you cannot select for the current input.)
Item
Contrast Adjust the image contrast.
Brightness Adjust the brightness of the image.
Color Adjust the color of the image.
Sharpness Adjust the sharpness of the image.
Noise Set the function to reduce screen noise.
reduction
*1
NCE mode Press
/
R-level Adjust red of the image color.
/
G-level Adjust green of the image color.
B-level Adjust blue of the image color.
to
NTSC mode *2 Set the black level with
US
JAPAN
Auto setting Automatically adjusts items such as the
samplingphase depending on the type of
input signal.
.
Position Press
and adjust with
Adjust to eliminate flicker.
Adjust to eliminate periodic patterns and
flickering when many fine vertical lines
appear on the screen.
Adjust the horizontal position of the image.
Description Computer Y/P
Yes
Lower Higher
Yes
Darker Brighter
No
Lighter Deeper
Yes
Softer Sharper
No
On (Enable) Off (Disable)
. Toggle the NCE mode with Yes
. 1/2/3
Yes
Less red More red
Yes
Less green More green
Yes
Less blue More blue
. No
: NTSC (US) mode
: NTSC (JAPAN) mode
Yes
then change mode using Yes
.
Phase Yes
Frequency Yes
H-position Yes
37
Camera
/P Video S-video
B R
(XC3000)
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes No
Yes Yes Yes Yes
Yes Yes Yes No
Yes Yes Yes No
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes
No Yes Yes No
No No No No
No No No No
No No No No
No No No No
No No No No