Table of Contents
Advertisement
Repairs
Mounting
1. Mount the legrest using the two screws and
spacers. See the illustration on the previous
. Use a torque wrench to tighten the screws.
Tightening torque 24 Nm.
2. Mount the front bracket of the manual
adjustment unit/actuator. See the illustration on
the previous . Start with the screw and washer.
Tighten the screw using a torque wrench.
Tightening torque 47 Nm.
Then fit the lock nut and washer on the inside
of the bracket.
3. Mount the front ends of the UniTrack rails.
See the illustration.
4. Mount the legrest's top cover by carefully
pressing its bracket into place on the legrest's
fixing screws/spacers. See the illustration.
Remove the front ends of the UniTrack rails
Mount the legrest's top cover by carefully
pressing its bracket into place on the legrest's
fixing screws/spacers
39 39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
Replacing a legrest
Hide quick links:
Advertisement
Table of Contents
