Call Monitor; Call Park - Panasonic KX-TDA600 Operating Manual

1.3 Telephone Features and Operation
• If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically by pressing another CO, ICD Group or INTERCOM button to make or answer
another call.
• For the Call Hold Retrieve operation using a PDN/SDN button, refer to "1.3.49 PDN (Primary
Directory Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX-TDA200/
KX-TDA600 only)".
1.3.7

Call Monitor

A preprogrammed extension user can listen to the ongoing conversation of a busy extension user.
To monitor
PT/SLT/PS
Off-hook.
Press red DSS, PDN, or SDN,
or dial extension number.
1.3.8

Call Park

You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve the
parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a Call
Park button and Call Park (Automatic Park Zone) button have been established, you can select either way
to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you need to
specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park.
38 Operating Manual
(DSS)
OR
(PDN)
B.Tone
OR
(SDN)
OR
extension no.
5
Monitoring starts
C.Tone
Enter 5.