Where To Go Next - Cisco XR 12000 Series Getting Started Manual

Where to Go Next

RP/0/0/CPU0:router# clock set 14:12:00 10 dec 2008
14:12:00.090 PST Wed Dec 02 2008
RP/0/0/CPU0:router# clock update-calendar
RP/0/0/CPU0:router# show clock
14:12:00.090 PST Wed Dec 02 2008
Related Documents
Related Topic
Descriptions of the clock commands
Commands used to configure NTP
Configuration of NTP
Where to Go Next
When you have completed the configuration procedures in this chapter, consider the following resources
for additional configuration documentation:
•
•
•
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
3-74
For information on configuring additional general router features, see
Router Features
For information on using the Cisco IOS XR software more efficiently, see
and Shortcuts
For information on configuring interfaces, see the hardware documents listed in the
Documents" section on page
Document Title
Clock Commands on Cisco IOS XR Software module of Cisco IOS XR
System Management Command Reference for the Cisco XR 12000
Series Router
NTP Commands on Cisco IOS XR Software module of Cisco IOS XR
System Management Command Reference for the Cisco XR 12000
Series Router
Implementing NTP on Cisco IOS XR Software module of Cisco IOS XR
System Management Configuration Guide for the Cisco XR 12000 Series
Router
x.
Chapter 3 Configuring General Router Features
Configuring Additional
CLI Tips, Techniques,
"Related
OL-24755-01