Contents; Prerequisites; Standalone Router - Cisco XR 12000 Series Getting Started Manual

Bringing Up the Cisco IOS XR Software on a

Standalone Router

This chapter provides instructions for bringing up the Cisco IOS XR software on a standalone router for
the first time. This section applies to standalone routers that are delivered with Cisco IOS XR software
installed.
Note If you are upgrading a Cisco XR 12000 Series Router from Cisco IOS software to
Cisco IOS XR software, see the Cisco IOS XR software document Upgrading from Cisco IOS to Cisco
IOS XR Software on the Cisco 12000 Series Router.

Contents

•
•
•
•

Prerequisites

The following sections describe the software and hardware requirements for bringing up a standalone
system running Cisco IOS XR Software Release 4.1.
OL-24755-01
Prerequisites, page 2-17
Bringing Up and Configuring a Standalone Router, page 2-19
Verifying the System After Initial Boot, page 2-20
Where to Go Next, page 2-25
C H A P T E R
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
2
2-17