Verifying the System After Initial Boot
Examples
The following example shows the root-system username and password configuration for a new router,
and it shows the initial log in:
--- Administrative User Dialog ---
Enter root-system username: username1
Enter secret:
Enter secret again:
RP/0/0/CPU0:Jan 10 12:50:53.105 : exec[65652]: %MGBL-CONFIG-6-DB_COMMIT :
'Administration configuration committed by system'. Use 'show configuration
commit changes 2000000009' to view the changes.
Use the 'admin' mode 'configure' command to modify this configuration.
User Access Verification
Username: username1
Password:
RP/0/0/CPU0:router#
The secret line in the configuration command script shows that the password is encrypted. When you
enter the password during configuration and login, the password is hidden.
Verifying the System After Initial Boot
To verify the status of the router, perform the following procedure:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
2-20
show version
admin
show platform [node-id]
exit
show redundancy
show environment
Chapter 2
Bringing Up the Cisco IOS XR Software on a Standalone Router
OL-24755-01