Page 2
Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Page 3
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Page 5
• Inspect the tool cords periodically and, if damaged, have them repaired by a qualified repair person. Constantly stay aware of the cord location. Following this rule will reduce the risk of electric shock or fire. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Do not allow familiarity with the hammer drill to cause a lack of alertness. A fraction of a second of carelessness is enough to cause severe injury. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Page 7
3. Slide depth-stop gauge to the desired position 4. Securely tighten the auxiliary handle by rotating it clockwise. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Page 8
3. Remove the chuck key. 4. Loosen the sleeve by hand. 5. Remove the drill bit. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
4. When drilling holes in tile, practice on a scrap piece to determine the best speed and pressure. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Page 10
NoTICE: The chuck screw has left-handed threads. Attach a new chuck to the spindle and tighten the chuck screw. CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
(i.e. persons not authorized by the manufacturer); CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0 CORDED HAMMER DRILL WITH 50-PIECE ACCESSORY KIT - 054-3179-0...
Need help?
Do you have a question about the 054-3179 and is the answer not in the manual?
Questions and answers