Makita 2414EN Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Vise Section
DISASSEMBLING
Refer to Fig. 7.
Fig. 7
1. Remove M8x30 Pan head screws (2pcs.)
and Chain from Screw guide.
M8x30 Pan head
screw (2pcs.)
Vise screw
Screw guide
5. Separate Vise screw section from Vise plate
by removing Retaining ring S-8.
Shoulder pin 10-16
Vise screw
Screw guide
Flat washer 8
Note:
Be careful not to lose
two Flat washers 8.
Chain
Shoulder pin
10-16
Vise plate
3. Turn Vise plate to the position
where Retaining ring S-8 can be
easily removed.
Vise plate
Retaining ring S-8
2. Remove Retaining ring S-16 from Shoulder pin 10-16.
Retaining ring S-16
Hole for removing
Shoulder pin 10-16
Retaining
ring S-8
6. Shoulder Pin 10-16 is removed through the hole
for the removing Shoulder pin 10-16.
Hole for the removing
Shoulder pin 10-16
Shoulder pin 10-16
Shoulder pin 10-16
Vise plate
4. Push Vise plate to the hole
for the removing Shoulder
pin 10-16.
Vise plate
P 5/ 9