Makita 2414EN Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature
DISASSEMBLING
Armature can be removed as drawn in Fig. 2.
Fig. 2
1. Remove Brush holder caps and Carbon
brushes from the machine.
2. Separate Motor housing together with Handle
by unscrewing six M5x50 Pan head screws
and M5x35 Pan Head screw.
3. Remove Armature from Gear housing.
4. Armature can be disassembled.
ASSEMBLING
Assemble Armature by reversing the disassembly procedure. (Refer to Fig. 2)
[3] -2. Helical gear 41
DISASSEMBLING
1. Remove Safety cover section as drawn in Fig. 3.
Fig. 3
1. Unscrew M6x10 Thumb screw and open Center cover
together with Safety guide.
And then remove M10x25 Hex bolt, Flange 90 (2pcs.),
Cut-off wheel, O ring 14 and Ring 17 from the machine.
Center cover
M6x10
Thumb screw
M5x50
Pan head screw
( 6 pcs. )
M5x35 Pan head screw
Washer 15
Ball bearing
6202DDW
Safety guide
Viewed from Motor housing side
Important: It is not necessary to remove the other screws.
M5x35 Pan head screw
2. Remove Safety cover section (including Safety
guide and Center cover) from Gear housing
by unscrewing four M6x20 Pan head screws.
And then remove the other Ring 17 from Spindle.
Safety cover
M5x50
Pan head screw
( 6 pcs. )
Ball bearing
629LLB
Resin washer
Ring 17
P 3/ 9