Table of Contents
Advertisement
▀
Menus
Menu for firing
CO
__.__ %
2 =
P _
Flue 45°C
S _
Boiler 47°C
B:stop
C:menu
C
Menu for adjustments
Calibration of
Lambda sensor?
A:Yes
C:Next
C
Setting for
desired Co
2 : 13,5 %
B:Top
A:Down
C:Next
C
Fired with / Running on pellets
B:Yes / Yes
C:No / No
C
Has cleaning been done?
B:Yes /
C:No
C
Total time: 143h
After cleaning 18h
Has cleaning been done?
B:Yes
C:No
Press to reset.
Displays the operating
time after cleaning.
Effecta AB - Västra Rågdalsvägen 21 - 434 99 Kungsbacka - +46(0)300 - 22320 - export@effecta.se
Effecta Woody Lambda
Flue 45°C
Boiler 47°C
A:start
Starts the boiler
Indicates boiler temp.
Indicates flue
gas temp.
Showing carbon dioxide concentration, becomes
active at a flue temperature of 100°C.
Primary air damper is open 70%
Secondary air damper is open 30%
Turning off the boiler.
A
Calibration ongoing
Normally the concentration does not change. If the
wood is extremely dry, it can be reduced or the re-
verse in the case of damp wood.
The pump starts when flue
B
= 95°C
B:Top
A:Down
C
The pump stops when flue = 85°C
A:Down
B:Top
C
Use the fan
A:Yes / Yes
B:No / No
Total operating time
for the boiler.
P _
S _
C:menu
Damper status.
Damper status.
Entry menu.
Calibration must be
done before the first
firing. I.e. there must be
no fire in the boiler.
Charging pump start
temperature.
C:Next
Charging pump stop
temperature.
C:Next
In the case of a weak
draught, the boiler fan
can be used for pellets
burning.
11
Advertisement
Table of Contents
