Table of Contents
Advertisement
VIVOTEK - Built with Reliability
Pnotify - During the configuration process, configuration errors or information will be indicated
by a small pnotify message boxes on the lower right of the screen.
3-1. System
3-1-1. System - General
The system general information window allows you to change the system host name, time zone,
system date and time, and set up a scheduled reboot of the system.
Note that if NTP time server configuration is preferred, you should configure all of your cameras
to listen to the same time server as those shown in the pull-down menu. You need to configure
camera settings over a web console, and set up the same configuration in the System >
General settings > System time page. The precondition is that the system must have access
to the Internet.
58 - User's Manual
Advertisement
Table of Contents
