Vivotek NR8401 User Manual page 112

VIVOTEK - Built with Reliability
The following information is shown with each event log:
1. Level: The following severity level can be applied to an event.
1-1. Error: Configuration errors such as lack of system memory or a faulty camera password.
1-2. Info: General information such as acquiring an IP from DHCP server.
1-3. Warning: Configuration and operation errors such as re-starting server service.
1-4. Config: Events that are generated due to configuration changes, such as a change in
address or that to a camera configuration.
Below are some sample messages:
Event Level
DHCP renew Info
address
DDNS result Info
Reboot Info
System Info
shutdown
Restore Info
NTP time update Info
Disk insert Info
Disk remove Info
Firmware Info
upgrade
Recycle start Info
Recycle start Info
112 - User's Manual
Source
[service name]
[service name]
User: [username]
Power button
User: [username]
[service name]
[service name]
[service name]
User: [username]
[service name]
[service name]
Message
DHCP renew:
interface: [interface]
Address: [IP address]
Subnet mask: [subnet mask]
Gateway: [gateway]
DDNS result: [OK/Failed]
System reboot
System shutdown
Restore configuration
NTP time update: [time offset]
Disk inserted. [disk id]
Disk removed. [disk id]
Firmware upgrade
Recycle start:
[volume name] [volume size] [volume
free]
Recycle finish:
[camera id] [expired date] [recycle
date]