Attaching Foot Pads; Led Indicators - Vivotek NR8401 User Manual

Attaching Foot Pads

If you intend to place your chassis on a shelf or desktop, attach the foot pads
to the bottom of the chassis where you can find corner marks for reference.

LED Indicators

Name Behavior
Power button 1
LED
2
3
Status LED 1
2
3
4
HDD LED 1
2
3
Default button 1
LED
2.
Backup button 1
LED
HDD tray LEDs
Volume status
Read/write status
HDD tray LED (2) 1
2
3
4
VIVOTEK - Built with Reliability
Definitions
Off Powered down
Flashing Red Powering on
Constant Red System is on
Constant Green System is ready
Flashing Green Booting, proceeding with backup, restore, or restoring
default
Constant Orange System errors, system buzzer will also be sounded
Flashing Orange Errors occurred with backup, restore, or restoring
default
Constant Green Recording software is up and running
Flashing Green Recording videos
Flashing Red Connection errors, cameras disconnected, or no
volume is available.
Off Not functioning
Flashing Green Restoring system defaults
Off Not functioning
Flashing Green Backing up system configuration
Constant White Hard disks are ready and configured into a volume
Off No hard disk is present
Flashing Blue Read/write activities on hard disks
Constant Blue Drive is connected
User's Manual - 23