Table of Contents
Advertisement
Care and Cleating of Your Cooting Center
Proper care and cleaning are
important for your cooking
center to give you efficient and
satisfactory service. Follow these
directions carefully in caring for
it to help assure safe and proper
maintenance.
POWER IS OFF BEFORE
CLEANING ANY PART OF
YOUR COOKING CENTER.
Control Panels
Don't use sharp-edged utensils
Clean the panels with a lightly
dampened cloth. DO NOT USE
soap and water or abrasive
cleaning pads or powders. These
control mechanisms.
30
I
Microwave Oven
Oven Lamp
To replace microwave oven
lamp, first disconnect power at
main fuse or circuit breaker
panel.
Step 1: Remove grill above
microwave oven. To do so, open
microwave oven door, then remove
the two screws from the bottom of
the grill.
Step 2: Remove the light cover by
removing the two screws.
Step 3: Remove the tape around
the base of the light. The tape is
there to prevent the light from
loosening during shipment and
door closings. Removing the tape
might be difficult.
Step 4: Unscrew the bulb
I
carefully. Use a cloth 10 protect
your hands in case the glass
breaks.
Note: The light is not standard.
Replace it with o similar 125-voI[,
20-watt bulb, which is available
from your GE supplier.
Step 5: Screw replacement bulb
into socket and replace light cover
and grill. Reconnect power to
cooking center.
Temperature Probe
The probe is sturdy, but care
should be taken in handling it. Do
not twist it and avoid dropping it.
Clean as soon as possible after USC.
Wipe it with a sudsy cloth, then
rub metal parts with a plastic
scouring pad, if necessary. Rinse
probe in an automatic dishwasher. )
Advertisement
Table of Contents
