Hotpoint K964GP Use And Care Manual page 19

Table of Contents

Advertisement

LOWER OVEN
How to Bake and Time Bake in Your Lower Oven
When set to bake, the oven cooks
by dry heat. Both bake and broil
units are energized (the broil
unit at reduced wattage) until
(from 150 to 550"F.) is reached.
turns the oven heating units off
and on to maintain the desired
quiet
slight
"click" sound
heating units are turned off and on.
display
temperature
will show I ()()°F. if the oven
temperature is less than or equal
is reached, the oven signals.
without preheating the oven. If
preheating is required, put your
temperature has been reached.
When cooking food for the first
Don't open the oven door to check
on foods any more often than
necessary-doing so could cause
undesirable baking results. Check
when mini tnutn time shown on
recipe is
Then cook food
Lip.
longer, if necessary.
work after automatic oven cleaning
until the oven has cooled and
"LOCKED" no longer appears on
the disptay.
How to Set Your Oven
for Baking
Step 1: Place oven shelf on shelf
support called for on Baking Guide.
Step 2: Make sure the oven door
is closed. Then touch BAKE pad.
Step 3: Press INCREASE or
DECREASE pad. The temperature
you set shows in the lower left
display.
Step 4: Touch START pad to begin
baking. Display shows "BAKE,"
"TEMP," the oven set temperature
and actual oven temperature as the
oven heats. When set temperature
has been reached, the control beeps
six titnes and "PrE" flashes in the
display. The display then shows
the set temperature continuously.
Step
5: Center food on the shelf.
Make sure at least 1 inch of space
is left between the cooking
container and the oven wall for
proper heat circulation. Close the
oven door.
Step
6: If you wish, you may set
the Timer to the desired cooking
time as indicated in your recipe
(see How to Set the Timer seclion).
When the set time is up, the
control signals and then beeps
every 60 seconds until the TIMER
pad is touched.
Note: The Timer has no effect
on the Bake mode, and it does
not turn the oven off when time
is up.
Step 7: When baking is done,
touch CLEAWOFF pad to turn the
oven off. Be sure foods are done
before taking them out of the oven.
Note: You can change the bake
temperature while baking by
pressing the INCREASE or
DECREASE pad.
If the oven has already preheated,
then the control will not beep when
the new oven temperature is
reached. The oven temperature
display will not keep track of the
actual oven temperature; it will
immediately show the new
temperature.
If the new temperature is less than
the actual oven temperature, and
the Preheat Alarm has not already
sounded, the control will beep, and
"PrE" will flash in the titne-of-ddy
display. The oven temperature
display will not keep track of the
oven temperature; it will
immediately display the new
temperature.
(cotltitlli('(111(,.$t /7<I,qt')
19

Advertisement

Table of Contents
loading

Table of Contents