Power Level - Hotpoint K964GP Use And Care Manual

I
MICROWAVE OVEN
you to preset the cooking time.
Power level 10 (High) is
recommended for most cooking,
flexibility. See the cookbook,
To become better acquainted with
by following the steps below.
I
Step 1: Fill a cup 2/3 full of
cup thot has no metal decoration
Microwaving Tips section). Place
Step 2: Touch the TIME COOK pad.
Step 3: Select your cook time.
time of one minute. Display shows
"1 :()()" and "POWER 10." "COOK
TIME" flashes.
Because automatic power level 10
is recommended for this CLIp of
coffee. there is no need to change
the power level. (If power level 10
is not appropriate, see "H
14
I
Step 4: Touch the START pad.
Step 5: When time is up, the oven
signals and display flashes "End."
The oven, light and fan shut off.
Step 6: Open the door.
Using the Time Cook II
Feature
The Time Cook II feature lets you
set two time cooking functions
within one program. This is ideal
when you want to change power
levels during your cooking
operations. Here's how to do it.
Step 1: Place food in oven in
microwave-safe container and
Step 2: Touch the TIME COOK
pad.
Step 3: Select your first cook time.
For example, touch 2, 1 and 5 for a
cooking time of two minutes and
Step 4: Touch the TIME COOK
pad again.
to Change Power Level
How
After setting cook time, touch
the POWER LEVEL pad, then
touch desired number for new

power level.

Step 6: Touch the START pad.
Step 7: "COOK TIME," the first
the display.
to
OW
Step 8: At the end of the first
programmed cook time, the second
power level, "COOK TIME" and
the second programmed cook time,
counting down, show on the display.
Step 9: When time is up, the oven
signals and display flashes "End."
The oven. light and fan shut off.
Step 10: Open the door.
Questions and Answers
Q. I set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
wasn't done. What happened?
A. Since house power varies due to
time or location, many Time Cook
recipes give you a time range to
prevent overcooking. Set the oven
for the minimum time, test the
food for doneness, and cook your
food a little longer, if necessary.
Q. I touched the number pads and
selected my power level. When I
touched the START pad, however,
my oven didn't come on. Why not?
A. The TIME COOK pad must be
touched before setting the cooking
time with the number pads or else
your oven will not begin cooking.
Q. I want to cook on a power
need to do?
A. To cook on a power level other
than High, first touch the TIME
COOK pad and set the desired
cooking time. Then touch the
POWER LEVEL pad. "POWER
10" appears on the display. Enter
new power level on the number
pads and then touch the START pad.
Q. Can I interrupt my Time
Cook function to check the food?
A. Yes. To resume cooking, simply
close the door and press the
START pad. The timer must be
reset for cooking to resume unless
time is remaining on timer.