Sartorius combics 1 Operating Instructions Manual page 70

Configuration
Setup
uniCom1
Printer
Analog
Memory
1
) = When setting 8.14.1 is active, the analog data output only works for XBPI weighing instruments
2
) = Not with setting 8.14.1
70
3
YDP01IS
line*
label
lab ff
YDP02
5. 1. through 5.4.
Numeric menu as for COM1
YDP03
5. 1. through 5.4.
Numeric menu as for COM1
YDP02IS
line*
label
Uni-pri
5. 1. through 5.6.
Numeric menu as for COM1
YDP04IS *
line*
label
lab ff
yam01is
8.12.
8.12. 1 *
8.12. 2
8.13.
8.13. 1 *
8.13. 2
8.14.
1
8.14. 1 * )
8.14. 2
8.15.
2
8.15. 1 )
8.15. 2
yam01is
Printer Configuration
YDP01IS
Strip printer
Label printer
Label printer with manual feed
YDP02 models
YDP03-0CE
YDP02IS
Strip printer
Label printer
Universal Interface
YDP04IS
Strip printer
Label printer
Label printer with manual feed
YAM01IS as electronic memory for print data
Analog Data Output Port for PLC Operation
Analog Out: Value
Net value
Gross value
Analog Out: Error Indicator
High level (20 mA)
Low level: 0/4 mA on this interface during calibration and configuration.
Analog Out: Data Output Mode
Zero to maximum capacity
Minimum/maximum values
Analog Out: Data Output Min./Max.
Min. (0/4 mA) input in kg
Max. (20 mA) input in kg
Verifiable Data Memory
YAM01IS external data memory