Sartorius combics 1 Operating Instructions Manual page 60

Configuration
appl
V
3.21.
9. 1.
O
3. 5.
3. 7.
3. 8.
4. 2.
4. 3.
4. 4.
4. 5.
4. 6.
9. 1.
O CL
3. 5.
3. 6.
3. 7.
3. 8.
4. 3.
4. 7.
60
3.21. 1 *
3.21. 2
9. 1. 1
9. 1. 2 *
Numeric menu as for Weighing
3. 7. 1 *
3. 7. 2
3. 8. 1
3. 8. 2 *
4. 2. 1 *
4. 2. 2
4. 3. 1 *
4. 3. 2
4. 4. 1
4. 4. 2
4. 4. 3
4. 4. 4 *
4. 4. 5
4. 5. 1 *
4. 5. 2
4. 6. 1 *
4. 6. 2
4. 6. 3
4. 6. 4
9. 1. 1
9. 1. 2 *
Numeric menu as for weighing
Numeric menu as for Counting
3. 7. 1 *
3. 7. 2
3. 8. 1
3. 8. 2 *
4. 3. 1 *
4. 3. 2
4. 7. 1
4. 7. 2
4. 7. 3 *
Static Display After Load Removed
Display is static until unload threshold reached
Display is static until c is pressed
Factory Settings for All Application Programs
Yes
No
Checkweighing
Minimum Load for Automatic Taring and Automatic Printing
Automatic Taring: 1st Weight Tared
Off
On
Start Application with Most Recent Application Data when Combics is Switched On
Automatic (on)
Manual (off)
Check Range
30% to 170%
10% to infinity
Activate Control Line for "Set" as:
"Set" output
Ready to operate (for process control systems)
Activation of Outputs
Off
Always active
Active at stability
Active within check range
Active at stability within the check range
Parameter Input
Min, max, target
Only target with percent limits
Automatic Printing
Off
On
Only values within tolerance
Only values outside tolerance
Factory Settings for All Application Programs
Yes
No
Classification
Minimum Load for Automatic Taring and Automatic Printing
Minimum Load for Initialization and Definition of "Class 1" Lower Limit
Automatic Taring: 1st Weight Tared
Off
On
Start Application with Most Recent Application Data when Combics is Switched On
Automatic (on)
Manual (off)
Activate Control Line for "Set" as:
"Set" output
Ready to operate
Activation of Outputs
Off
Always active
Active at stability