Sartorius combics 1 Operating Instructions Manual page 51

Minimum Load for Automatic
Storage/Transfer of Values
The minimum load for automatic
storage or transfer of weight values is
configured under menu item 3.6.
Once the load on the weighing instru-
ment exceeds the specified minimum,
the measured value is stored or trans-
ferred automatically, if the operating
menu is configured for automatic
storage (menu item 3.16.2).
Display
Press w to toggle the display between
the weight currently on the weighing
instrument and the current weight value
plus the value in totalizing memory.
Press and hold w (> 2 sec) to toggle
to the Info mode. In the "Info" mode,
the total of gross weight values is
shown first. Press w again to show
the net value.
Press the w key again to show the
transaction counter in the main display.
Press w one more time to exit the
Info mode.
To exit the "Info" mode earlier, press
and hold w (> 2 sec).
Printout
Under menu item 3.17 you can configure
whether a printout is generated manually,
by pressing p (3.17.3), or automatically
when a weight value is stored in the
totalizing memory (3.17.2 or 3.17.3).
When you generate a printout manually
by pressing p, the transaction counter
value is not printed.
For automatic printouts, you can define
whether a printout is generated after each
individual transaction (3.17.2) or includes
all totalized components (3.17.3).
Each printout starts with the header lines
and the date and time, followed by a
dotted line, before printing the gross, tare,
net and transaction counter values.
The printout of components includes
the header lines and date and time only on
the first printout. Subsequent printouts
include only the gross, tare, net and trans-
action counter values (and serial number,
if configured).
The individual and component printouts
are configured under menu items 7.7
and 7.8.
The total data record is printed when
you clear the totalizing memory (by press-
ing the c key).
The total data record includes data from
the gross totalizing memory (*G), the net
totalizing memory (* N), the total trans-
action count (n) and a dotted line.
The fields selected under menu items
7.9. and 7.10. are printed every time the
c key is pressed, regardless of whether
individual or component printing is
configured.
51