Upgrade 8180 Firmware - Algo 8180 User Manual

Upgrade 8180 Firmware

1. From the top menu, click on System, then Maintenance.
2. In the Maintenance section, click Reboot
Wait 30-60 seconds for the device to reboot and the web page to
automatically reload.
3. Login to the device again, and click on System.
4. In the Upgrade section, click on Choose File and select the 8180
firmware file to upload. Note that both the FW firmware and MD5
checksum files must be loaded.
5. Click Upgrade
6. After the upgrade is complete, confirm that the firmware version has
changed (refer to top right of Control Panel)
- 43 -
.