Algo 8180 User Manual page 27

Device Name
Introduction
Section on Status
Page
Web Interface
Session Timeout
Log Level
Log Size
Log Method
Log Server
Hardware
Watchdog
SNMP Support (v1
get only)
SA-Announce
Support
SA-Announce
Server
Local Management
Port
Name to identify the device in the Algo Network
Device Locator Tool.
Allows the introduction text to be hidden from
the login screen.
Set the maximum period of inactivity
after which the web interface will log out
automatically.
Use on the advice of Algo technical support
only.
Allows the 8180 to write to external Syslog
server if the option for external (or both) is
selected.
If external (or both) is selected this is the
address of the Syslog server on the network.
Use on the advice of Algo technical support
only.
Additional SNMP support is anticipated for
future, but the 8180 now responds to a simple
status query for automated supervision.
Contact Algo technical support for more
information.
Syn-Apps' SA-Announce paging application
converts unicast streams to multicast and
delivers them to the target endpoints. The
feature can only be used on the 8180 when
Multicast Master Mode is disabled (set to
'None') in the "Basic Settings > Multicast" tab.
Enter the SA-Announce Server to use the
Syn-Apps paging feature. To use the server
provided by the DHCP Option 72, leave the
field blank.
Enter the local management port.
- 27 -