Algo 8180 User Manual page 30

If using a generic configuration file, extensions and credentials have to
be entered manually once the 8180 has automatically downloaded the
configuration file.
Generating a specific configuration file
1. Follow steps 1 to 6 as listed in the section "Generating a generic
configuration file" on page 29.
2. Rename file settings.txt to algom[MAC address].conf
(e.g. algom0022EE020009.conf)
3. File algom[MAC address].conf can now be uploaded on the
Provisioning server.
The specific configuration file will only be downloaded by the 8180 with
the MAC address specified in the configuration file name. Since all the
necessary settings can be included in this file, the 8180 will be ready to
work immediately after the configuration file is downloaded. The MAC
address of each 8180 can be found on the back label of the unit.
- 30 -