Parking Mode - HP f890g User Manual

3.4.3 Parking Mode

To monitor the vehicle when it is parked, you can activate Vibration
Detection, or Motion and Collision Detection.
Follow the steps below to change the settings for Parking Mode:
1. Press the
2. Press the
select Parking Mode, and then
press the
entering function menu.
3. Press the
Detection / Motion and Collision Detection / Off), and then press the
OK
button to complete setting.
• Vibration Detection:
If disconnected external power supply when the camcorder
-
is powered on, the system alert message "Wait 10 seconds
to enter Vibration Detection." This means the system will
power off and enter Vibration Detection automatically in 10
seconds.
Once Vibration Detection Mode is triggered, when the
-
camcorder detects any collision, it will automatically power
on and start recording, the event will be recorded for 60
seconds (per file).
In this mode, car camcorder is powered off until event
-
happens. This mode is more power saving.
• Motion and Collision Detection:
If disconnected external power supply when the camcorder
-
is powered on, the system alert message "Enter parking
button to enter the OSD menu.
/ button to
OK
button for
/ button to configure Parking Mode (Vibration
29