Parking Mode - HP u818x Kit Quick Start Manual

3.7 Parking Mode

To monitor the vehicle when it is parked, you can activate Park Recording, or
Motion and Collision Detection, or Timelapse.
Before you activate Parking Mode, please install ACC cable through
professional car service shop.
Follow the steps below to change the settings for Parking Mode:
1. Press the
2. Press the
OK
button for entering function menu.
3. Press the
Motion and Collision Detection / Timelapse/ Off), and then press the
OK
button to complete setting.
4. Press the
Note: ACC cable is not included in the package. Please ask for more information from your distributor.
3.7.1 Park Recording
- In normal recording, press and hold POWER key for 3 seconds, the screen
will show message "Press OK key to power off or enter Park Recording
after 10 sec." Please wait for 10 seconds and the camcorder will enter
Park Recording automatically. The camcorder will turn off the screen
temporarily, but still in recording status. Once the collision or vibration is
detected, it will automatically trigger emergency recording.
- To disable this function, press any key to wake up the screen, and press
again any key to resume to normal loop recording.
Note:
1. The video file taken in this mode is same as normal loop recording mode. It will be saved in the "Video" folder.
And the emergency file will be saved in the "Emergency" folder.
2. The file size is according to Record Interval setting.
button to enter the OSD menu.
/ button to select Parking Mode, and then press the
/ button to configure Parking Mode (Park Recording /
button to return recording screen.
30