Table of Contents
Advertisement
2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
If the camcorder is connected to the vehicle power supply, once start the
car engine, the camcorder will automatically power on and start
recording.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power within 10 seconds.
2.5.2 Manual Power On/Off and Reset
2.5.2.1 Manual Power On
Push the power switch and make sure that
the power switch locks on the memory card
slot.
On
2.5.2.2 Manual Power Off
Push the power switch and make sure that
the memory slot is released and the
camcorder starts power off sequence. Do not
power on the camcorder when it is in the
power-off sequence, or the recorded file may
Off
become corrupt.
2.5.2.3 Reset the Camcorder
In case the camcorder fails to function normally due to unknown causes,
push the power switch and verify the memory card is in the removable
state; wait for 10 seconds and push the power switch again to restart the
camcorder.
17
Advertisement
Table of Contents
