Download Print this page

Driving Safety; Speed Cam Alert - HP f890g User Manual

Hide thumbs

Advertisement

3.4 Driving Safety

The following driving safety function is for reference only.
Drivers are advised to exercise discretion based on actual road
conditions.
Note:
1. The Driving Safety function is limited to triggering no more than two alarms at the
same time. If a voice and alert message have been triggered, any other alarm will
be ignored until either of the two is settled.
2. Satellite positioning must be completed before functions such as Speed Cam Alert,
Speed Position Management, Speed Limit Alert, LDWS and FCWS to be enabled. Be
sure to check that Satellite positioning has been completed prior to using the
product.
3. The detections of LDWS, FCWS and FCMD may be inaccurate when used in rain, at
night or in environments of insufficient lighting. Drivers are advised to exercise
discretion based on actual road conditions.

3.4.1 Speed Cam Alert

If the Speed Cam Alert function is enabled, once your car's location is
determined by GPS and approaches a speed cam, this product produces
audible alert and screen message.
To enable the Speed Cam Alert, do the following:
1.
Press the
2.
Press the
select Speed Cam Alert, and then
press the
entering function menu.
3.
Press the
select On, and then press the
OK
button to enable the
function.
26
button to enter the OSD menu.
/
button to
OK
button for
/
button to

Advertisement

loading