Parking Mode; Park Recording - HP f450x User Manual

3.5 Parking Mode

To monitor the vehicle when it is parked, you can activate Park Recording,
or Collision Detection, or Timelapse.
Before you activate Parking Mode, we commend to install ACC cable
through professional car service shop.
Follow the steps below to change the settings for Parking Mode:
1. Press the
2. Press the
OK
press the
3. Press the
Recording / Collision Detection / Timelapse/ Off), and then press
OK
the
4. Press the
Note: ACC cable is not included in the package. Please ask for more information from your
distributor.

3.5.1 Park Recording

- In normal recording, press and hold Power key for 3 seconds, the
screen will show message "Press OK key to power off or enter
Park Recording after 10 sec." Please wait for 10 seconds and the
camcorder will enter Park Recording automatically. The
camcorder will turn off the screen temporarily, but still in
recording status. Once the collision or vibration is detected, it will
automatically trigger emergency recording.
- To disable this function, press any key to wake up the screen and
resume to normal loop recording.
Note:
1. The video file taken in this mode is same as normal loop recording mode. It will be saved in the
"Video" folder. And the emergency file will be saved in the "Event" folder.
2. The file size is according to Record Interval setting.
button to enter the OSD menu.
/ button to select Parking Mode, and then
button for entering function menu.
/ button to configure Parking Mode (Park
button to complete setting.
button to return recording screen.
26