Table of Contents
Advertisement
Intercom Operation
(applicable only with additional handsets)
The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line, allowing you to still
receive incoming calls.
Making an Auto Intercom Call
1. Make sure the handset is OFF (not in TALK mode).
2. Press the delete/int/conf button on the handset .
3. Use the touch-tone pad to select the handset you want to page.
NOTE:
a) If the user has not entered the paged handset number within a few
seconds, the handset shall display a paged handset number list (i.e.
Handset 2, Handset 3, Handset 4, ) if Handset 1 is paging the handset .
b) Even if the handset has not been registered with all 4 handsets, the paging
list will display all handset numbers.
c) If the user has selected a paged handset number that has not been
registered, the handset will emit an error tone and ask the user to retry
again.
4. A short page tone is heard and then the two handsets are immediately
connected.
Receiving handset shall immediately come into the auto intercom mode that
both "microphone" and "speaker" of this receiving handset shall be enabled
such that the user of receiving handset can freely talk and listen to the
conversation.
5. When finished, press the EXIT button or delete/int/conf button on either
handset to deactivate the intercom.
NOTE: The system i s expandable up to 4 handsets (by purchase
of optional Model 2110 handset with recharge cradle). When 4
handsets are registered, the system can handle 2 separate intercom
operations at once, for example, 1st handset intercoms with 2nd
handset while 3rd handset intercoms with 4th handset .
Receiving an Intercom Call
When you receive an intercom call, your handset beeps. To answer the call
press the delete/int/conf button or TALK/SPEAKER button.
14
Advertisement
Table of Contents
