Parameters And Selections; Quick Reference; Activity - Wayne Saccadic Fixator Instructions For Using Manual

Parameters and Selections

To change a parameter on either the Saccadic Fixator or the Sports Vision Trainer, do the
following:
1. Press ENTER.
2. Press the key for the parameter (1-9). The parameter number will be displayed in the leftmost
position and the current value of the parameter will be displayed in the rightmost three positions.
3. Enter the value for the parameter. If you make a mistake, repeatedly press the 0 key until the
rightmost three positions display a single "0", then enter the value.
4. Press ENTER.
The Wayne Sports Vision Trainer (WSVT) have a number of new features that are not available
on the Wayne Saccadic Fixator. All the listed programs have been preset for correct
operation. Changes can be made as follows:
Enter the selected listed program PRESS "enter" Now press #0, AND:
1. Press #66 (0-66) and press ENTER Sets 66 lights mode. (Right and left side of unit.
2. Press #33 (0-33)and press ENTER Sets 33 lights mode (Right sides)
3. Press #21 (0-21)press ENTER uses the 9 oclock light on the right side of the board for central
fixation light use in peripheral awareness modes for the full board.
4. Press #20 (0-20)press ENTER uses the normal center fixation lights in the right and left sides of
the unit.
5. Press #11 (0-11) press ENTER, Auditory Que for ctr light.
6. Press #12 (0-12) press ENTER No auditory Que

Quick Reference

Activity (1) Time (2) Speed (3) Pattern (4) Lights (5) Timeout (6) Flash (7) Dual (0) Ctr (0) Sound(0)
# Parameter Value

1 Activity

1. Self pacing: user controls speed of lights
2. Self pacing with center fixation
3. Self pacing through all 9 sequence patterns
4. Automatic pacing: depress button for sound and count
5. Automatic pacing: sound with each light
6. Automatic pacing through all 9 sequence patterns
7. Speed adjusts automatically to match user's speed
8. Wayne Anticipator Speed-Trac
9. Visual memory
10. Speed ball anticipation/reaction time
11. Eye/hand reaction time: start/stop
12. Eye/hand response to an auditory stimulus
13. Eye/hand release/response reaction time ("reaction plus")
14. Sports testing/training: Gardner product
Wayne Engineering TM , a subsidiary of Eyecarrot Innovations Corp. in Canada, is the leading provider of high-performance
instruments for testing and enhancing visual and motor skills. Learn more at www.wayneengineering.com and www.eyecarrot.com.
3