Sports Screening - Gardner Product With Flash Option; Sports Reaction/Plus Measurements; Additional Sports Programs - Wayne Saccadic Fixator Instructions For Using Manual

Optometric profession's standard for testing
Table of Contents

Advertisement

16
30
100

69. Sports Screening - Gardner Product With Flash Option

Flash "on-off" lasts for 20 msec. Starting speed of lights is 40 lights/min. Elapsed time preset to
30 seconds. For program information, click on "Parameters and Selections"on our website
MANUALS page.
Activity (1) Time (2) Speed (3) Pattern (4) Lights (5) Timeout (6) Flash (7) Dual(0)
14
30
40
70. Sports Reaction/Plus Measurements, Prog. 9-40
Button/lights aways appear at the 3 o'clock location to permit the use of external switches such
as foot pads or the IR beam sensor. These must be used with the Interface Control Box.
Remember to press and hold button until an auditory beep is heard. For program information,
click on "Parameters and Selections" on our website MANUALS page.
Activity (1) Time (2) Speed (3) Pattern (4) Lights (5) Timeout (6) Flash (7) Dual(0)
13
5

Additional Sports Programs

Remember that all these programs can be modified to fit your specific needs; i.e. the elapsed
time setting, the speed of the lights, the pattern of the lights, the time-out, and the delay times.
Refer to for all the stored parameters in the computer.
Instructions For Retrieving These Programs
1. Depress the "enter" key.
2. Depress the "9" key. A "9" will appear in the leftmost position of the display.
3. Enter the number of the selected program (shown before each program's title). The number will
be shown in the right three positions of the display.
o
If you make a mistake, repeatedly depress the "0" key until the display shows only a "9" in
the leftmost position and a "0" in the rightmost position. Then re-enter the program
number.
4. Depress the "enter" key. The program will now be retrieved.
5. Make any desired adjustments to the settings.
6. Depress the start/stop reset button to begin running the program.
7. ''' For the Sports Vision Trainer, The default (preset) settings, makes the right and left sides active.
To select only the right side, follow these instructions:
Wayne Engineering
TM
, a subsidiary of Eyecarrot Innovations Corp. in Canada, is the leading provider of high-performance
instruments for testing and enhancing visual and motor skills. Learn more at
2
3
1
0
3
1
0
20
66|
0
66
www.wayneengineering.com
and www.eyecarrot.com.
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents