Table of Contents
Advertisement
4 CREATING THE SECOND SCREEN
4.4.3 Setting panelmeter display function
(To the following page)
4 - 9
Describes the operations for setting the panelmeter display function.
1) Click
on the tool palette.
2) As the dialog box appears, refer to the level display
function settings and make the following settings.
Device: Set to D12.
Shape: Use No. 39.
2)
3) Set the attributes of the panelmeter.
Make settings as shown on the left.
3)
4) Click the [Form] tab.
4)
5) Make the [Form] tab settings as indicated below.
Type: Top 1/2
5)
Upper: Fixed, 10000
Lower: Fixed, 0
6) After setting, click the Extended>> button.
6)
MELSOFT
4 - 9
Advertisement
Table of Contents
