Table of Contents
Advertisement
3 CREATING SCREENS
(From the previous page)
3 - 10
POINT
With the [Edit]-[Consecutive Copy] menu, a figure can be copied continuously.
12) The dialog box appears.
After setting each item, click the OK button.
Position: Choose Bottom.
Text: Type Y0.
Horizontal alignment: Click the center button.
13)
13) Click the Copy from ON button.
14)
15)
14) Set the attributes of the lamp.
Here, designate as shown on the left.
15) Click the OK button.
16) The lamp set on the screen is updated.
17) Repeat steps 7) to 16) for the number of lamps
to set. (Here, repeat 3 times.)
Device: Set Y1 to Y3.
Text: Type Y1 to Y3.
The lamp pasted in 7) must be copied and
pasted to a new position.
(Refer to 2.2.)
MELSOFT
3 - 10
Advertisement
Table of Contents
