Connecting To Plc Cpu - Mitsubishi Electric GOT 900 Operating Manual

5 STARTING GOT FOR CHECKING

5.4 Connecting to PLC CPU

5 - 3
Here, the bus connection is used to connect the GOT and the PLC CPU. For details of
the bus connection board and the bus connection cable, refer to GOT-A900 Series
User's Manual (GT Works Version5/GT Designer Version5 compatible Connection
System Manual).
A975GOT
Bus communication cable
POINT
Be sure to turn OFF the whole system before connecting the GOT and the PLC
CPU.
Bus communication board
Set the extension number switch to 1.
Set the I/O slot switch to 0.
PLC CPU (ACPU)
MELSOFT
5 - 3