Table of Contents
Advertisement
4 CREATING THE SECOND SCREEN
(From the previous page)
4 - 10
7) Click the [Graph] tab.
8) Make the [Graph] tab settings as indicated below.
Upper: Fixed, 100
8)
Lower: Fixed, 0
9)
9) Click the OK button.
10) A frame of display range appears at the upper-left
of the screen.
Move the frame to the desired position, then click.
11) Using the handles ( ), set the size.
(Refer to 2.2.)
12) Copy the panelmeter display function and change
the device of the second panelmeter display
function to "D13".
13) This sets two panelmeter display functions.
MELSOFT
4 - 10
Advertisement
Table of Contents
