Table of Contents
Advertisement
3 CREATING SCREENS
3.4.2 Setting numerical input function
3 - 7
Describes the operations for setting numerical input function.
POINT
In this manual, make setting to display the key window as soon as you touch the
part where the numerical input object is set.
To make this setting, choose the [Common]-[Auxiliary Setting]-[Project] menu and
turn on the "When touch input is detected, open key window at the same time"
check box.
1) Click
on the tool palette.
2) As the dialog box appears, refer to the numerical
2)
display function settings and make the following
3)
settings.
4)
Device: Set to D10.
Shape: Use No. 21.
3) Set the attributes of the figure and numerical
value.
Here set as shown on the left.
4) After setting, click the OK button and place the
display range frame of the numerical input
function.
5) Copy the numerical input function and change
the device of the second numerical input function
to "D11".
6) This sets two numerical input functions.
MELSOFT
3 - 7
Advertisement
Table of Contents
