Led Lighting; Temperature Control - Electrolux ETB4602AA User Manual

Pull out shelf
To remove shelf
1. Extend the tray
fully outward
2. Lift the tray up
gently and then
pull forward to
remove the tray
from the frame
To remove the frame
1. Push the rear tabs
gently inwards
on both sides of
the frame, pull the
frame towards
you to remove.
WARNING
WARNING
Fill the ice tube tray with potable water only.
WARNING
CAUTION

LED lighting

Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED lights
should be serviced by the manufacturer.
Refer to the warranty page for contact details.
Automatic Ice Maker (EHE522*, ETE572*)
The automatic ice making function pumps water from the
water tank located in the refrigerator and dispenses it into
the automatic ice maker in the freezer.
The ice will then be dropped into the ice bin located
beneath the icemaker
If the water tank is empty, the ice maker will automatically
turn off after 3 attempts at pumping water from the tank.
The ice maker indicator on the user interface shows the
operational status of the ice maker (Refer control instructions).
Water Tank Refilling
Step 1. Pull the tank directly out of
the tank housing frame.
Step 2. Pour potable water
through the lid at the top of the
water tank.
Step 3. Push the tank directly into
the tank housing frame. To avoid
water leaks ensure that the tank
nozzle fully engages with the
housing socket.
Step 4. Ensure ice maker is
switched ON (refer control
instructions).
WARNING
CAUTION
Do not fill the Water tank with anything other then clean
water (Filtered or Mineral water).
(EHE5220AA, ETE5720AA)
Soft drink, juice, tea or hot water etc, can damage your
automatic icemaker.
The Water tank can withstand a maximum water
temperature of 60°C
Tips and Useful Information
TIPS & INFORM A TION
Remove and clean ice bin and water tank once a mont h,
discarding unused ice and water. This will ensure fresh ice
and smooth operatio n of your icemaker.
Make sure your refrigerator is level to avoid uneven ice
cubes.

TEMPERATURE CONTROL

If you want to change the temperature, follow the instructions
in the section ab out the user interface for your model. Ensure
that you make only small adj ustments and wait 24 hours to
see if it's correct to your liking.
IMPORTANT
TIPS & INFORM A TION
When you set a temperature, you set an averag e
temperature for the whol e refrig erator cabi net.
Checking the softness of ice cream is a good indication
that your freezer is the right temperature, while checking the
temperature of water kept in the refrigerator is a go od way
of checking the temperature of the food co mpart ment.
Temperatures inside eac h compart ment may vary,
depending on how much food you store and where you
pla ce it.
High or low room temperature may also a ect the actual
temperature inside the refrigerator.
Top mount freezer temperature adjustment
1. Select the freezer control.
2. Slide the control to the right (as per image below).
3. Slide the control to the left (as per image below).
FREEZER TEMPERATURE SETTING RECOMMEDATION
Summer (> 35°c)
Normal
Winter (<15°c)
Set to less co ld
Set to co lder
TEMPERATURE CONTROL
13