Removing Features; Crisper Bin; Spillsafe™ Glass Shelves; Freezer Shelves - Electrolux ETB4602AA User Manual

REMOVING FEATURES

Crisper Bin

Removal (standard Crisper Bins):
1. Empty food from the crisper. On some models it will be
necessary to remove the bottle storage bins.
2. Remove the crisper bin(s) by pulling forward, then up
and forward again.
3. For top mount models, remove the crisper shelf by lifting
the catches on the left and right underside of the shelf
and pulling the shelf forward.
CATCH
SpillSafe™ glass shelves
To remove the shelves,
gently pull them forward
until the shelf comes clear
of the shelf guides. To return
the shelf, make sure there
is nothing behind that
may obstruct movement.
Gently push the shelf, into
the cabinet and back into
position.
Freezer shelf
Remove the freezer shelf
by lifting the catches on the
right and left underside of
the shelf to release the shelf
then pull the shelf toward
you.
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed back
so they are fully closed.
WARNING
WARNING
Never close the door while the telescopic slides are
extended. This may damage the slide and/or refrigerator or
cause the slide to become disengaged from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all the way.
2. Slide the drawer into place over the slides and push
the bin in until it stops.
3. Drop drawer into position.
12
REMOVING FEATURES
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all the
way then lift bin out from the front of the bin. When refitting
insert the rear of the bin first then lower into position.
When replacing the bins after cleaning, we recommend
fitting the lower bin first.
WARNING
CAUTION
Never close the door while the telescopic slides are
extended. It may damage the slide and/or the refrigerator or
cause the slide to become disengaged from the refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of the
freezer.
this is only possible on Top mount models.
1. Remove the ice
bin and ice cube
tray. If the ice tray
assembly is frozen to
the carriage, simply
squeeze the tray
and shelf together to
break the ice.
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the front
of the shelf, and removing it from the rear.
Insert into the slot at the rear of
the shelf
4. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
5. Fit the carriage by sliding it into the runners until the front
if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
Then engage into the front of
the shelf