Twist & Serve Ice; Led Lighting - Electrolux ETB4600B User Manual

CAUTION
Never close the door while the telescopic slides are
extended. It may damage the slide and/or the refrigerator
or cause the slide to become disengaged from the
refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of
the freezer.
Note : This is only possible on top mount models.
1. Remove the ice
bin and ice cube
tray. If the ice tray
assembly is frozen to
the carriage, simply
squeeze the tray
and shelf together to
break the ice.
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the front
of the shelf, and removing it from the rear.
Insert into the slot at the rear
of the shelf
4. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
5. Fit the carriage by sliding it into the runners until the
front if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
WARNING
Fill the ice tube tray with potable water only.
CAUTION

LED lighting

Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED lights
should be serviced by the manufacturer.
Refer to the warranty page for contact details.
ARNING
Then engage into the front
of the shelf
Automatic Ice Maker
The automatic ice making function pumps water from
the water tank located in the refrigerator and dispenses it
into the automatic ice maker in the freezer.
The ice will then be dropped into the ice bin located
beneath the ice maker
S & INFORM A TION
If the water tank is empty, the ice maker will automatically
turn off after 3 attempts at pumping water from the tank.
The ice maker indicator on the user interface shows the
operational status of the ice maker (Refer control
instructions).
Water Tank Refilling
Step 1. Pull the tank directly out of
the tank housing frame.
Step 2. Pour potable water
through the lid at the top of the
water tank.
Step 3. Push the tank directly into
the tank housing frame. To avoid
water leaks ensure that the tank
nozzle fully engages with the
housing socket.
Step 4. Ensure ice maker is
switched ON (refer control
instructions).
CAUTION
Do not fill the water tank with anything other than clean
water (Filtered or Mineral water).
Soft drink, juice, tea or hot water etc, can damage your
automatic icemaker.
The water tank can withstand a maximum water
temperature of 60°C.
Tips and Useful Information
Remove and clean ice bin and water tank once a month,
discarding unused ice and water. This will ensure fresh ice
and smooth operatio n of your icemaker.
Make sure your refrigerator is level to avoid uneven ice
cubes.
REMOVING FEATURES 11