Removing Features; Crisper Drawer; Nutriplus Tm (Anti-Oxidant Filter); Glass Shelves - Electrolux ETB4600 User Manual

REMOVING FEATURES

Removal of Crisper Drawer:
1. Empty food from the crisper. On some models it will be
necessary to remove the bottle storage bins.
2. Remove the crisper by pulling forward, then up and
forward again.
3. For top mount models, remove the crisper shelf by lifting
the catches on the left and right underside of the shelf
and pulling the shelf forward.
CATCH
NutriPlus (Anti-Oxidant Filter)
TM
Installing Filter Cartridge
Your filter can be found in the crisper. To enjoy the full
benefit of NutriPlus , it is important to install it after
TM
turning on the refrigerator. For installation, please follow
the following instruction.
1. Remove plastic wrap
2. Hook the filter to the back of the crisper bin.
Replacing Filter Cartridge
The filter is located at the back of the crisper.
Hold the filter, move upwards to release from the hooks.
10 REMOVING FEATURES

Glass shelves

To remove the shelves, gently
pull them forward until the shelf
comes clear of the shelf guides.
To return the shelf, make sure
there is nothing behind that
may obstruct movement. Gently
push the shelf, into the cabinet
and back into position.
Freezer shelf
Remove the freezer shelf
by lifting the catches on the
right and left underside of
the shelf to release the shelf
then pull the shelf toward you.
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting the
front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed back
so they are fully closed.
WARNING
Never close the door while the telescopic slides are
extended. This may damage the slide and/or refrigerator or
cause the slide to become disengaged from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all the way.
2. Slide the drawer into place over the slides and push
the bin in until it stops.
3. Drop drawer into position.
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all
the way then lift bin out from the front of the bin. When
refitting insert the rear of the bin first then lower into
position.
When replacing the bins after cleaning, we recommend
fitting the lower bin first.