Using Your Refrigerator; Removing Features - Electrolux ETB4600C User Manual

18 www.electrolux.com

5. USING YOUR REFRIGERATOR

Refrigerators work by transferring heat from
the food insideto the outside air. This operation
makes the back and sides of the refrigerator
feel warm or even hot particularly at start-up
and on warm days – this is normal.
Avoid placing food against the air vents
in the refrigerator as it affects efficient
circulation. If the door is opened frequently,
a light frosting will occasionally occur on
the freezer's interior. This is normal and will
clear after a few days. If the freezer door is
accidentally kept open, a heavy frost will coat
the inside walls and should be removed.
Your new refrigerator uses a high-speed
compressor, along with other energy-efficient
components, which may make unusual sounds
and be more noticeable at night and quieter
times. These sounds simply indicate your
refrigerator is working how it should. They
include:
• Compressor running noises;
• Air movement noise from the small fan
motor;
• A gurgling sound, similar to water boiling;
• A popping noise, heard during automatic
defrosting; and
• A clicking noise, prior to compressor
start-up. Further details can be found in
the Troubleshooting Guide
IMPORTANT
For top mount refrigerators (where
the freezer is on top of the fresh food
compartment).
• Don't place food forward of the ribs on
the freezer floor, as it will keep the door
open.
For bottom mount refrigerators (where
freezer is below the fresh food
compartment):
• Ensure all freezer drawers and shelves are
pushed back completely to prevent them
from keeping the door open.
WARNING
LED lighting
Your appliance is fitted with long life
LED lighting. In the unlikely event the
LED lights should fail, then the LED lights
should be serviced by the service
agent, to avoid a safety hazard. Refer
to the warranty page for contact
details.

5.1 REMOVING FEATURES

Crisper Bin
Removal (standard Crisper Bins):
1. Empty food from the crisper. On some
models it will be necessary to remove the
bottle storage bins.
2. Remove the crisper bin(s) by pulling
forward, then up and forward again.
3. For top mount and single door, remove
the crisper shelf by lifting the catches on
the left and right underside of the shelf
Ribs
and pulling the shelf forward.