CHECKING THE INJECTOR
EAS2GC1352
1. Check:
• Injectors
Obstruction Replace, and check the fuel
pump and the fuel injection system.
Refer to "FUEL INJECTION SYSTEM" on
page 9-28.
Deposits Replace.
Damage Replace.
2. Check:
• Injector resistance
Refer to "CHECKING THE FUEL INJEC-
TOR" on page 9-81.
CHECKING THE THROTTLE BODY
EAS2GC1353
1. Check:
• Throttle body
Cracks/damage Replace.
2. Check:
• Fuel passages
Obstructions Clean.
ECA
NOTICE
• Before removing the throttle body, clean
the area around the throttle body to pre-
vent dirt and other foreign material from
falling into the engine.
• If the throttle body is subject to strong
shocks or dropped during cleaning, re-
place it.
• Do not use any caustic carburetor clean-
ing solution.
• Do not directly push the throttle valves to
open them.
• Do not loosen the throttle valve stopper
screw "1", throttle valve pulley nut "2", or
throttle valve screw "3". A loss of perfor-
mance may occur.
• Do not use compressed air to clean the
throttle body. Foreign materials may ad-
here to the intake air pressure sensor pas-
sage "a" and fuel injector "b" in the
throttle body.
2
3. Check:
CHECKING THE THROTTLE BODY JOINT
EAS2GC1354
1. Check:
1
8-10
THROTTLE BODY
• Starter knob/idle screw passage "c"
Obstruction Blow out with compressed
air.
• Throttle body joint "1"
Crack/damage Replace.
3
b
a
c
1