Control Functions; Indicator Lights And Warning Lights; Engine Stop Switch; Start Switch - Yamaha WR450F Owner's Service Manual

CONTROL FUNCTIONS

EAS2GC1029
INDICATOR LIGHTS AND WARNING EAS2GC1030
LIGHTS
1. Engine trouble warning light " "
2. Fuel level warning light " "
Fuel level warning light " "
This warning light comes on when the fuel level
drops below approximately 1.6 L (0.42 US gal,
0.35 Imp.gal). When this occurs, refuel as soon
as possible.
The electrical circuit of the warning light can be
checked by pushing the start switch. The warn-
ing light should come on for a few seconds, and
then go off.
If the warning light does not come on initially
when the start switch is pushed, or if the warn-
ing light remains on, have a Yamaha dealer
check the electrical circuit.
Engine trouble warning light " "
This warning light comes on or flashes if a prob-
lem is detected in the electrical circuit monitor-
ing the engine. If this occurs, have a Yamaha
dealer check the vehicle.
The electrical circuit of the warning light can be
checked by pushing the start switch. The warn-
ing light should come on for a few seconds, and
then go off.
If the warning light does not come on initially
when the start switch is pushed, or if the warn-
ing light remains on, have a Yamaha dealer
check the electrical circuit.

ENGINE STOP SWITCH

EAS2GC1031
The engine stop switch "1" is located on the left
handlebar. Continue pushing the engine stop
switch till the engine comes to a stop.
After the engine stops, the multi-function dis-
play will go off and the power supply to the ECU
(Electronic Control Unit) will be cut off if the en-
gine stop switch is pushed and held.
1 2
1-18
CONTROL FUNCTIONS
TIP
The multi-function display will go off after one
minute if the engine stop switch is not pushed.

START SWITCH

EAS2GC1032
The start switch "1" is located on the right han-
dlebar. Push this switch to crank the engine
with the starter.
EAS2GC1033

CLUTCH LEVER

The clutch lever "1" is located on the left han-
dlebar. The clutch lever disengages or engag-
es the clutch.
Pull the clutch lever toward the handlebar to
disengage the clutch, and release the lever to
engage the clutch.