Checking The Injector; Checking The Throttle Body; Checking The Throttle Body Joint - Yamaha YZ 2016 Series Owner's Service Manual

CHECKING THE INJECTOR

EASB296323
1. Check:
• Injectors
Obstruction  Replace, and check the fuel
pump and the fuel injection system.
Refer to "FUEL INJECTION SYSTEM" on
page 8-20.
Deposits  Replace.
Damage  Replace.
2. Check:
• Injector resistance
Refer to "CHECKING THE FUEL INJEC-
TOR" on page 8-68.

CHECKING THE THROTTLE BODY

EASB296324
1. Check:
• Throttle body
Cracks/damage  Replace.
2. Check:
• Fuel passages
Obstructions  Clean.
ECA
NOTICE
• Before removing the throttle body, clean
the area around the throttle body to pre-
vent dirt and other foreign material from
falling into the engine.
• If the throttle body is subject to strong
shocks or dropped during cleaning, re-
place it.
• Do not use any caustic carburetor clean-
ing solution.
• Do not directly push the throttle valves to
open them.
• Do not loosen the throttle valve stopper
screw "1", throttle valve pulley nut "2", or
throttle valve screw "3". A loss of perfor-
mance may occur.
• Do not use compressed air to clean the
throttle body. Foreign materials may ad-
here to the intake air pressure sensor pas-
sage "a" and fuel injector "b" in the
throttle body.
2
3. Check:
• Starter knob/idle screw passage "c"
Obstruction  Blow out with compressed
air.

CHECKING THE THROTTLE BODY JOINT

EASB296325
1. Check:
• Throttle body joint "1"
Crack/damage  Replace.
1
7-8
THROTTLE BODY
3
b
a
c
1