Control Functions - Yamaha DT125E 1977 Owner's Manual

CONTROL FUNCTIONS
Main switch
According to the main key position, the
ignition and lighting systems can be used as
follows:
Key
position
OFF
ON
Description
Engine cannot be started.
Lights and horn cannot be
operated.
Engine can be started.
Lights and horn can be
operated.
. Key
removal
Possible
Not possible
Hendlebar switches
The handlebar switches are located near the
right and left handle grips and are used for
the following functions:
"ENGINE STOP" switch
Make sure that the engine stop switch is
turned to " R U N " position. The engine
switch has been equipped to ensure safety in
an emergency such as when the motorcycle is
upset or trouble takes place in the throttle
system. The engine will not start or run when
the engine stop switch is turned to " O F F " .
1. " E N G I N E STOP" switch