Shorthand Programming Mode - Avaya 2410 User Manual

7.2 Shorthand Programming Mode

1. Press Admin or
2. The Admin or Admin1 menu appears, similar to the following:
Admin Pages
With the exception of Expl?, the names shown are the features that you can assign to soft keys. When Admin
has been selected, you can display the full name of the feature by pressing Expl?
See Longhand Programming
Admin1 Page
Similarly, when Admin1 is pressed, you can assign any one of the functions shown to a soft key.
3. On the Admin pages, press
4. When the function required is shown, press the adjacent
5. If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter the data using the
normal phone keypad.
6. The upper part of the display reverts to showing the functions currently assigned to
7. To select the display key against which to program the new function, press
Caution
· Do not select the slot used for the Admin function.
Replacing this function will lock the phone for further programming until reset through the telephone system.
8. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
· To end programming, press
· To continue programming other functions, press
9. Repla, Keep and Delet are shown along the right-hand edge of the display.
Press Repla
·
displayed.
To keep the existing function and forget the function just programmed, press Keep
·
To delete the existing function and forget the function just programmed, press Delet
·
2410/5410 Phone User Guide
IP Office
Admin 1. See Function Key Programming
.
54
and to move through the list of features.
EXIT.
to replace that existing function with the one just programmed. BUTTON PROGRAMMED! is
Comments on this document? infodev@avaya.com
Function Keys: Function Key Programming
.
51
.
or
Cont.
15-601076 Issue 06b (23 December 2015)
.
and .
.
.
.
Page 53