Adding Staples
The procedure for adding staples of the Finisher (optional) is as follows.
Finisher (Optional: MJ-1027/MJ-1028)
1
Open the front cover of the Finisher.
3
Take the empty staple case out of the staple
cartridge.
5
2
Install the staple cartridge.
1
2
1
Take off the staple cartridge.
4
1
Install a new staple case into the staple cartridge
and pull out the seal.
6
Close the front cover of the Finisher.
Adding Staples
2
3
2
1
2
4
5