Table of Contents
Advertisement
ENG
3. PROGRAMMING AND CONFIGURING THE DEVICES
Navigation of the Display Masks
Use the "Alarm", "Program", "Esc", "Down/Up", and "Enter" keys.
Note: depending on the model of Supernode, the buttons may differ as indicated here below. In
typcial control mode, the button icons are displayed on the masks in the controller software.
PRG ESC
clear
3.1 Programming the Supernode
Use Password: 1234 for entering the Service or Manufacturer menu.
1. Set the number of devices connected to the gateway:
Values available: from 1 to 20 devices.
Menu path: Service Service Settings Device settings
2. Set the address and type of device :
Models available: heaterSteam, humiSteam X-plus, gaSteam,
generic device
Menu path: Service Service Settings Device settings
The address setting and type of model must be selected for
each device connected to the gateway.
+08U003325 Supernode for humidification - 1.0 - 20.06.2015
6
Advertisement
Table of Contents
