Table of Contents
Advertisement
Changing the screen picture
¢
¢
v
Ð
Display
s
Scroll to the
Press the display key. The
View§
active screen picture is dis-
played
s
Select Picture/Clock .
Press the display key.
§Save§
¤
Save changes.
Setting display illumination
Depending on whether or not the handset
is in the charging cradle you can set differ-
ent levels of display illumination. If the
charging cradle is switched on, the display
is permanently dimmed.
¢
¢
v
Ð
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select
On
or
Off
.
Outside Charger
Select
On
or
Off
.
Press the display key.
§Save§
a
Press and hold (idle status).
Activating/deactivating auto
answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
¢
¢
v
Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
¢
Screen Picture
Selection
line.
¢
Lighting
‰
(
= on).
§OK§
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select volume.
Press display key if necessary
§Save§
to save the setting perma-
nently.
If t is assigned a different function:
Open menu.
§Options§
Volume
Select and press
Configure setting (see above).
Changing ringtones
u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u
Ringtones:
You can choose between 15 different
melodies.
You can configure the following functions
with different ringtones:
u
: For external calls
Ext. Calls
u
Internal Calls
: For internal calls
u
All: The same for all functions
Handset settings
.
§OK§
15
Advertisement
Table of Contents
