Siemens Euroset 5005 Installation Instructions Manual page 5

Operation on public
telephone systems
Public telephone systems - in
some cases by special order/
request – offer you a range of
useful additional services (e.g.
call divert, call back on busy,
three-party conference etc.).
These services can be selected
using specified key
combinations, which your net-
work provider will notify you
of.
You can save the entire key
combination, including the
number of a fixed call divert
destination, to your repertory
or speed dial keys just like a
normal number.
Recall key
In public telephone systems,
the recall key is required to use
certain additional services;
e.g. for "Call back on busy".
By default, your telephone is
set to tone dialling with a flash
time of 100 ms (Tone 1). You
may need to adjust the flash
time using the slide switch on
the underside of the
telephone.
Appendix
Care
To clean, wipe with a moist or
antistatic cloth only, never
with a dry cloth (risk of elec-
trostatic charging and
discharge) or strong cleaning
agent.
4
EN
If your telephone is not
working perfectly
Lift handset, no dialling
tone: Is the connecting lead
correctly plugged into the tel-
ephone and the telephone
socket?
Dialling tone audible but tel-
ephone will not dial: The
connection is OK. Is the dial-
ling mode set correctly?
The other party cannot hear
you: Mute activated?
Regular pulse noises can be
heard during a call: The
connection is receiving meter-
ing pulses from the exchange,
which the telephone cannot
interpret. Contact your
network operator.
Insert strips
Blank insert strips for the rep-
ertory keys can be found on
the Internet at http://www.sie-
mens.com/euroset.
Contacts
If you should encounter any
problems when operating the
telephone connected to a
communication system with
analogue network access,
please contact the network
operator responsible or your
dealer.
Authorisation
The telephone you have pur-
chased is designed for
operation in your country, as
marked on the packaging and
on the unit.
The CE mark attests to the
phone's compliance with the
essential requirements of the
R&TTE directive.